MICROSTAR

Dénomination commerciale

MICROSTAR

B366U1OM100C19LR00

++B366U1MICROSCOPESX8

Numéro de référence/catalogue

OM-100C19L

HIBCC

Classe I

Législation applicable

MDR [Règlement (UE) 2017/745 relatif aux dispositifs médicaux]

Statut

Sur le marché

Quantité

1

Description complémentaire du produit

General purpose microscope for use in doctor’s office

URL des informations complémentaires

https://ecleris.com/en/users-manual/

Dimensions cliniques

Aucune dimension clinique enregistrée pour ce dispositif.

Nomenclature européenne des dispositifs médicaux — la classification produit UE attribuée à ce dispositif.

• Z12011101OPERATIVE MICROSCOPES

1 avertissement enregistré — faire défiler le panneau pour tout voir.

• CW999

  To avoid risk of electric shock, this device must only be connected to an earth-protected power supply. • Do not install the equipment next to heat sources, such as heaters. • The Microscope must be used in medical facilities with a proper electrical installation, including a grounding in compliance with the regulations. • The microscope should be connected to the mains through the supplied cord or a replacement with the same certifications. • The mains should be grounded with no adapter needed. • The sectioning of the electrical network is carried out by disconnecting the power cable, or by removing the connector from the electrical outlet. • The device is connected to a ground protection through a ground conductor in the power supply cable. This ground connection is essential for the safe use of the equipment • The device is provided with a connectable power cable that assures proper electrical isolation. If it needs to be replaced, it should have the same features than the original. • Only connect the device to visualization devices that meet the IEC 60601-1 standard. • Device not appropriate to be used near or around flammable anesthetic gas mixture with air, oxygen or nitrous oxide. • Do not look directly into the light output; the optical head has a very bright light output. • To move the microscope (during installation and intended use) verify light is off, in order to avoid bright light on the face. • Do not insert objects into the holes. Do not place any container with liquids on top of the device. • In case of interference with other electro-medical or electric equipment, it is recommended increasing the distance between the device and the other equipment to minimize these effects. • Do not open the device. Maintenance and repairs must be done by ECLERIS or an authorized company by the fabricant. ECLERIS will not be responsible for the consequences of repairs or maintenance carried out by unauthorized personnel.